Camera / SD / Mechanical
Video System: PAL Colour
fully compatible with Australian TV System.
Image
Device: 752 (H) x 582 (V) 437 664 Pixel
LOW
BLEMISH 1/3" Sony CCD image Sensor.
 
for:
ICX409AK Image Sensor info @ "SONY"
Lens: C or CS
Mount, Lens is NOT SUPPLIED with this Camera,
compatible lenses are: C Mount
(with
C-Spacer), CS Mount, Fixed, Manual Iris & Auto Iris 1/3" &
1/2" types on
this page,
EXCEPT Cat
Codes: CC21, CC25, CC21IRC, CC40, CS25MI & CS25AIDC,
additional information
here. 2.7 ~ 60 mm
Auto/Manual Iris, Variable Focal Length &
IR focus-shift corrected
Lenses
are on this
page
Scanning System: 2 : 1
Interlace, PAL 50 Hz vertical, 15 625 Hz horizontal.
Synchronisation: Internal.
Horizontal Resolution
(Pixels): ~ 720, this value is provided for comparative
purposes only. Better than Super-VHS resolution.
Minimum Illumination: ~ 0.1
lux @ F1.0, 3200º Kelvin with AGC = On, this value is provided
for comparative purposes only.
Automatic Electronic Shutter
(AES):
User configurable
On =
1/50 to 1/100 000 second, 20 milliseconds to 10 microseconds,
Off =
20 milliseconds for use with an Automatic Iris
Lens, low 20 ms shutter speed reduces/eliminates smear
associated with High Shutter Speeds that are necessary to
control exposure with a Fixed Iris Lens,
additional
CCTV Automatic Electronic Shutter information.
Automatic Iris (AI) Lens
Output: DC Drive, common 4 pin socket, rotary Potentiometer
level control.
Automatic Gain Control (AGC):
User configurable
On/Off.
Signal to Noise ratio: ~ 48
dB, measured with AGC off.
Back-Light Compensation (BLC):
User configurable
On/Off.
Made in Taiwan in an ISO
9001 certified factory.
Manufacturer's Experience:
20 + Years.
SD card management
Recording Trigger: Motion Detection (3 separate
areas), IP check, Network disconnected & Alarm Input.
Video Playback: Yes.
Card Slot: Back of Camera.
Compatibility: 128 MB to 4 GB SanDisk or Transcend.
INPUT / OUTPUT
Video Output: 1.14 V p-p
Composite Video 75 ohms, suit Australian TV, VCR, AV & Video
inputs, BNC socket, used for Lens setup &/or independent
monitoring using conventional Video Monitor.
Audio Output: Line Level output
for Amplified Speaker, RCA socket.
Alarm: 2 x Inputs, 2 x Outputs,
8 pin Mini-Din socket.
NETWORK: Standard RJ45 8p8c
socket.
RS485: 8 pin Mini-Din socket,
pin 7 = D-, pin 8 = D+. When used with
100 Channel RS485 PELCO™-D
compatible Remote Pan / Tilt / Zoom / Focus / Auxiliary
Receiver select EP Pelco-D
2400 bps.
Power: 12 Volts DC Regulated ~
450 mA (~ 600 mA Peak, 2.1 x 5.5 mm DC socket, center pin = (+).
Dimensions: ~ 80 mm Wide, ~ 70
mm High, ~ 145 mm Deep, excludes I/O sockets/connectors, ~ 480
grams.
|
Network
Network Protocol: HTTP, TCP/ IP, UDP, SMTP, FTP, PPPoE, DHCP,
DDNS, NTP, 3GPP, UPnP.
Remote Software: Free 36
Channel remote monitoring and recording software.
A/D Resolution: PAL 720 x 576 (D1) 352 x 288 (CIF) 176 x 144 (QCIF).
Ethernet LAN / WAN Port 10/100 Base-T , RJ45 connector.
Firmware Upgrade: http mode, can be upgraded remotely.
Web Browser Microsoft Internet Explorer 6.0 or above.
Image Display Rate Full D1 Resolution PAL: 25 FPS.
Compression Format Dual Mode: MPEG4 / MJPEG.
Triggered Actions: Mail, FTP, Save to SD card.
Security: Password Protection configurable.
Video Bitrate Adjustment: CBR, VBR.
Video Motion Detection (3 Areas).
Pre / Post Alarm: Configurable.
Users: Up to 10 simultaneous.
SDK: available for integration.
Video Format: AVI , JPEG.
Full Screen Monitoring.
Alarm I/O 1 in / 1 out.
Audio 2 Way. |
Air