18X Optical Variable Focal Length Lens Day Night SONY 960H Super HAD II CCD
Quick-Install 18X VariFocal Lens 960H SONY Technology "568 032 Pixel ExView Super HAD CCD II" + "Wide-Band Extra High Resolution Effio-E DSP" Day Night Infrared Sensitive Security Camera with extraordinarily High 650+ HTVL-E Resolution
  
Push-Button 18 times motorised variable Focal-Length Lens | motorised Focus | motorised IRCUT Filter | Extra-High-Resolution 960H ExView Super HAD CCD II from Sony eclipses earlier devices with 30% more Pixels extends resolution to 650+ HTVL-E | self contained quick-install Width-of-Vision and Focus are set via push buttons.

For Extra High Resolution Video Surveillance suitable for Showrooms, Offices, Warehouses, Homes, Factories, Outdoors (in a Housing) See-in-the Dark with an Infrared Illuminator.

QuicKam18X $269
 BULK BUY Price click on TRUCK for more information Bulk-Buy $189 (10+)

 
OPTIONS
 

Power Supply 12 VDC 1 Amp $20

Cable Video & Power 20 m $30

BRKT-220 Swivel Mounting Bracket $8

Cable-2155Skt Power-In Socket & Wires $3
Microphones better than inbuilt microphones from $5

Versatile 5 ~ 90 mm Motorised Variable Focal Length Lens.

Full-Screen 0.6 m 'Head & Shoulders' or 'Cash Drawer' shots @ 10 m.

Full-Screen 'Entry' 2 m wide shots @ 45 m.

Wide 14.4 m shots @ 15 m.

Compatible RS485 Devices
 2-Wire 128 Channel Joystick Controller
Test-CCTV35 PTZF Setup & Monitor & Analyser
IPwTX Wired / Wireless Network AV Server
 
Extra High 650 HTVL-E Resolution ! Better Colour Rendition ! Higher SNR
Effio DSP Extra-High-Resolution RS485 Motorised IR-CUT Filter for vivid Colour & maximum Low Light & Infrared sensitivity

New 568 032 Pixel 1/3" SONY II CCD Image Sensor & SONY Effio-E wide-band DSP

Colour Day Night Infrared sensitive Security Camera

Motorised IR-CUT Filter for excellent Colour Rendition & better low light / IR Sensitivity

See-in-the-Dark
 with an Infra-Red Illuminator

Use out-of-the-Box set parameters via push-button menu-driven On-Screen Setup

Be ready for 960H
 new generation of Security DVRs & Network devices
info

 

 

 
 This Quick-Install Security Camera utilises new CCD & DSP technology that improves image resolution, colour rendition, signal to noise ratio, reduces false colour noise, it is ideal for most Security Surveillance applications.

Built with Sony's latest image processor, this wide dynamic camera has the capability of achieving resolutions of over 650 HTVL-E.

For fixed applications press-button adjustment of Lens Focal Length (width-of-shot) and Focus, Automatic Iris takes care of varying light levels. Easy push-button Menu driven On-Screen setup to adjust Camera parameters. Ideal for domestic and commercial Security and easily added to an existing Security Recording system simply connect Video Output from Camera to an unused Security DVR Video input.

Connect this Security Camera to the Composite Video Input (AV, Yellow RCA socket) on most TVs and Domestic or commercial Recording Devices, if required a Microphone can be easily added and a single small diameter Cable used to carry Video, Audio & Power 20 or more metres.

Powered by Sony's 960H EXview Super HAD II CCD image sensor & Effio DSP this Security Camera is capable of an extraordinary 650+ HTVL effective resolution, far better than traditional Security Cameras, HTVL Effective Specification.

 
All values are approximate. @ 3 metres @ 5 metres @ 9 metres @ 15 metres
Width of Vision @ 5 mm setting 2.9 metres 4.8 metres 8.6metres 14.4 metres
Width of Vision @ 90 mm setting 0.16 metres 0.27 metres 0.48 metres 0.8 metres
Additional Lens selection info here        

 

Video System: PAL Colour fully compatible with Australian TV System.

Image Device: 960H ExView HAD CCD II from Sony 976(H) x 582(V) 568 032 Pixel ⅓" SONY ICX673AK, 5 µm (H) x 6.25 µm (V) pixel size. *"EXview HAD CCD Ⅱ" is a trademark of Sony Corporation. The "EXview HAD CCD Ⅱ" is a CCD image sensor that realizes sensitivity (typical) of 1000mV or more per 1µm2 (Color: F5.6/ BW: F8 in 1 s accumulation equivalent) and improves light efficiency by including near infrared light region as a basic structure of Sony’s "EXview HAD CCD".

DSP: SONY CXD4127GG Effio-E New-Technology Wide-Bandwidth Digital Signal Processor.

Lens: Motorised (push-button control) Focus & Focal Length, 18X (5 mm ~ 90 mm) Automatic Iris. Remote Control Interface: 2-wire RS485 or 6-Wire

IMPORTANT: If power to Camera is interrupted at power-on Camera re-boots to default 1X (5 mm focal length) setting, a BackUp-Battery can be used to provide a ~ 20 hour buffer.

Setup: On Screen Display, menu driven via push-buttons on Back of Camera or remotely via 2-wire RS485 or 6-Wire DC polarity reversal.

Scanning System: 2 : 1 Interlace, PAL 50 Hz vertical, 15 625 Hz horizontal.

Synchronisation: Internal.

Video Output: 1.14 V p-p Composite Video 75 ohms, suit Australian TV, VCR, AV & Video inputs, BNC socket.

Sensor/DSP Resolution: 960H/Effio-E 650+ HTVL-E better than Super-VHS, SDTV, DVD resolution. Whitepapers: HTVL Effective Specification & Camera Resolution Is Limited to 540 HTVL Maximum in CCTV Systems

Sensitivity: ~ 0.1 Lux @ F1.2 with IR-CUT Filter out of Optical path, (this value is provided for comparative purposes only) Camera produces images in total darkness when used with an Infrared Illuminator.

Day Night: Motorised movable Infrared Cut Filter (IR-CUT) Automatic (Filter moves based on illumination level), Colour (Filter in optical path), Monochrome (Filter out of optical path).

Movable Infrared Optical Filter: Automatic switching based on illumination level.
 In Day mode (well lit, colour) mechanism automatically positions IR-CUT optical filter between Lens and Image Sensor to exclude Infrared radiation that would otherwise adversely affect colour reproduction, this ensures colour rendition not possible with ordinary non-filtered or notch-filter type Day/Night cameras.
 Movable Infrared Cut Filter Day positionmoreMovable Infrared Cut Filter Night position
In Night mode (low light, monochrome) mechanism automatically removes IR-CUT optical filter allowing Infrared radiation to pass boosting low light and Infrared sensitivity, the result is significantly better night images using an Infrared Illuminator or with Infrared rich light sources. Infrared Response without Infrared filter is ~ 700 to ~ 1100 nm better than a 'CCTV notch IR Filter', additional CCTV Infrared Night Vision information.

Signal to Noise ratio (SNR): 50 + dB, measured with AGC off.

Lens Iris: Automatic or Manual 20 positions, via push button On-Screen-Display (OSD) setup Menu. Our recommendation is AUTO.

Back Light Compensation: On/Off via OSD setup. Our recommendation is OFF.

Automatic Gain Control (AGC): 3 levels via OSD setup. Our recommendation is MIN.

Image Settings: Brightness 50 levels, Sharpness 16 levels, Mirror On/Off, Display Focal Length setting 1~18X On/Off, Privacy Zones 4, via OSD setup.

Day & Night: Automatic (IR-CUT based on illumination), Colour (IR-CUT in optical path), B/W (IR-CUT out of optical path) via OSD setup. Our recommendation is AUTO.

Focus: Manual recommended, AUTO & K AUTO modes are not recommended, AUTO & K AUTO settings may be useful for some high contrast scenes with distinct outlines but is probably unsuitable in many common Security Surveillance situations. In K AUTO mode when Lens focal length is changed Camera makes one attempt to Focus.

Gamma: 0.45.

RS485: PELCO™-D Protocol 2400 / 4800 / 9600 bps for control of Focal Length, Focus & OSD setup via 'A' & 'B' terminals. When used with Wireless Video Two-Way Audio RS485 Server select EP Pelco-D 2400 bps. When used with Joystick RS485 & similar controllers to call up OSD Menu enter 95 press CALL, use Zoom +/- & Focus +/- to move cursor / change parameter, when Cursor is on Exit enter 95 press CALL to exit.

Power Requirements: 12 Volts DC Regulated, ~ 100 milliamps static ~ 200 milliamps when Zoom/Focus Motors are operating, via Screw Terminal Block.

Dimensions (mm): ~ 126 x 78 x 63, excludes BNC Socket & I/O Terminal Block.

Mass (grams): ~ 580.

Zoom Camera Dimensions

Made in China.

Manufacturer: Established 1997

Wired Lens & OSD Control via 6 wires: Requires 6 ~ 12 Volts DC. Focal Length increases when ZOOM terminal is Positive with respect to COM terminal & decreases when Negative. Focus moves towards Near when FOCUS terminal is Positive with respect to COM terminal & Far when Negative. OSD Setup Menu is displayed when MENU terminal is Positive with respect to COM terminal.

DC 6 wire Remote Control Zoom Focus OSD Setup